- All Products
- Hardware +-
- 3D Printing
- Arduino +-
- Breadboards and PCBs +-
- Components +-
- Heaters and Coolers
- Motor Drivers and Speed Controllers
- Motors, Solenoids, Wheels, and Pumps +-
- Power +-
- Raspberry Pi
- Sensors +-
- Switches and Buttons
- Wireless +-
- Wires and Cables
This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now u..
The Raspberry Pi Model B+ is the latest product in Pi family and has many improvements over the 2016..
The LED 8×8 dot matrix 1088AS consists of 64 LEDs wired together in rows and columns. Its made the w..
The Arduino GSM Shield allows an Arduino board to connect to the internet, make/receive voice calls..
This is the LilyPad Arduino Simple Board. It’s controlled by an ATmega328 with the Arduino bootloade..
Flame Sensor can be used to detect fire source or other light sources of the wavelength in the range..
RGB LED is a triple color LED, Red, Green, and Blue. These 5mm units have 4 pins, the longest one..
This is the XBee Pro Shield V03. It allows your Arduino board to communicate wirelessly using a an X..
A Potentiometer is merely a fixed value resistor with special sliding arm which allows you to se..
This is a 10K ohm linear sliding potentiometer. It is length is 75mm, width is 9mm, thickness is 65m..
LCD1602A 5V LCD display monitor blue screen with backlightGreat for microcontroller experimentUsed f..
This is a 2-channel stepper motor shield which can drive two stepper motors at the same time. The be..
The 20×4 character liquid crystal display (LCD) is great for applications where you need to display ..
This is the 3.7V 150 mAh LiPo (Lithium Polymer) battery, it is thin, light weighted, and powerful!Fe..
This is the 3.7V 2000mAh LiPo (Lithium Polymer) battery, it is thin, light weighted, and powerful!Fe..
This is the 3.7V 2300 mAh LiPo (Lithium Polymer) battery, it is thin, light weighted, and powerful!F..
This is the 3.7V 300mAh LiPo (Lithium Polymer) battery, it is thin, light weighted, and powerful!Fea..
This is the 3.7V 3300mAh LiPo (Lithium Polymer) battery, it is thin, light weighted, and powerful!Fe..
This is the 3.7V 900mAh LiPo (Lithium Polymer) battery, it is thin, light weighted, and powerful!Fea..
This is a 3.7V LiPo batteries charger. It can charge 5 batteries at the same time. Its package inclu..
Ender-3 is a high-performance 3D printer engineered by Creality to deliver premium results with a l..
This affordable extruder nozzle should be a part of your inventory to replace the clogged nozzles w..
This is the 28BYJ-48 unipolar stepper motor. It is small and it is great for getting started with st..
This is the ULN2003 stepper motor driver board. It is mainly used to control the 5V stepper motor. ..
This the basic 7-segment display. The LED color is red, it type is common Cathode, and it has 1 deci..
Two digit LED displays that with 14.2mm (0.56in) high characters. ..
Add lots more outputs to a microcontroller system with chainable shift registers. These chips take a..
The 8mm x 8mm LED Matrix consists of 128 LEDs (64 Red and 64 Green). These LEDs are wired into a mat..
8×8 dot matrix RGB (Red/Green/Blue) LED is a medium sized display that is used to display informatio..
The ADXL345 is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) mea..
This is a quad 2-input AND Gate SN74HC08N which means that it contains four independent, 2-inpu..
Arduinos are open-source physical computing platform based on simple i/o boards and integrated devel..
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digi..
This protective case is designed specifically for the Arduino Mega R3 with easy access to all ports ..
The Arduino Micro is a microcontroller board based on the ATmega32u4 (datasheet), dev..
The Arduino Mini 05 is a small microcontroller board originally based on the ATmega168, but now..
The Arduino Motor Shield is based on the L298, which is a dual full-bridge driver designed to dr..
The Arduino Prototyping Shield makes it easy for you to design custom circuits for your next Arduino..
The Arduino Wireless SD Shield is a great way to prototype wireless applications thanks to..
This protective case is designed specifically for the Arduino Uno R3 with easy access to all ports a..
The Arduino Uno Wi-Fi is the new Arduino Uno with an integrated Wi-Fi module! The board is base..
The Arduino WiFi Shield allows an Arduino board to connect to the internet using the 802.11 wireless..
This is a development programmer board for ATtiny13A, ATtiny25, ATtiny45, or even the ATtiny85. It h..
If you need a MCU with high performance at low power this is the MCU for you. This Atmel 8-bit AVR R..
USBasp programmer enables you to program Atmel AVR controllers using a firmware-only USB driver...
This is a very cheap ball caster, yet it is metal and powerful. The ball caster is basically like a ..
The Female DC power jack/connector is a common barrel-type power jack for the DC power supplies.Feat..
This is an easy to use 4 AA battery holder. Its cable is 12.7 cm long, and its followed by a power j..