- All Products
- Hardware +-
- 3D Printing
- Arduino +-
- Breadboards and PCBs +-
- Components +-
- Heaters and Coolers
- Motor Drivers and Speed Controllers
- Motors, Solenoids, Wheels, and Pumps +-
- Power +-
- Raspberry Pi
- Sensors +-
- Switches and Buttons
- Wireless +-
- Wires and Cables
This is 3.5mm golden colored bullet connectors. It is usually used to connect an electronic speed co..
This is a 9-pin female serial RS232 connector. It comes with dimensions of 3.1 x 1.8 x 1.2cm and 90 ..
This is one row of 40 female header pins with 2mm pin spacing. You can cut it depending on the ..
Weight5 gDimensions100 x 3 x 5 mm..
This is a 2-pin JST connector with a 2mm pin pitch. We like this connector for few reasons. Fi..
This is one row of 40 male header pins. The space of each pin is 2.54mm while the height of eac..
Weight5 gDimensions100 x 3 x 5 mmNumber of pins40..
The micro jumper is basically a short length conductor that is used to connect between two pin heade..
This micro USB breakout board is small and simple, but very effective and can be used in you..
This module enables you to add serial communication signal conversion between RS232 serial C..
This is a 2-pin screw terminal with 5.08mm pitch pins. It is rated up to 300V at 16A. Each terminal ..
This is a 3-pin screw terminals with 5.08mm pitch pins. It is rated up to 300V at 16A. Each terminal..
USB Type ‘B’ Female connector. The 4 connection pins have .1″ spacing allowing it to be inserted int..
Showing 1 to 13 of 13 (1 Pages)