Description

The line follower robot kit gives you the chance of having fun and it is a good practice for soldering. It consists of all the needed parts for the robot to follow a line from the PCB board as the body, the parts that need to be soldered on the PCB, to the motors, wheels and battery holder that needs to be attached. This robot is dedicated to follow a black line and it will work by following the steps that are shown in the booklet and it doesn’t require any programming.

Assembly guide

This kit includes the following:
  • 1x Battery Holder
  • 2x 100uF Capacitor
  • 2x Red LED
  • 2x Transparent LED
  • 1x LM393
  • 1x IC Socket
  • 2x Geared DC Motor
  • 2x PNP Transistor
  • 2x Photoresistor
  • 2x 3.3k ohm Resistor
  • 2x 1K ohm Resistor
  • 4x 51 ohm Resistor
  • 2x 10 ohm Resistor
  • 2x 10K ohm Potentiometer
  • 1x On/Off Push Button
  • 1x Chassis
  • 2x Wheels
  • 1x Wires
  • 1x Bolt
  • 1x Nut
  • 1x Round Nut
  • 2x Screws
  • 1x Booklet
Product Code: Line Follower
Availability: 12
SR36.00

Write a review

Please login or register to review